Glenn Edkins, 43, trading as GPE Plumbing and Heating, carried out faulty gas work while installing a boiler at a home in Barton-under-Needwood between 8 and 22 November 2012. Mr Edkins was not Gas Safe registered as the law requires.
His illegal handiwork was investigated by the Health and Safety Executive (HSE), who prosecuted Mr Edkins for breaching gas safety law.
Burton Magistrates' Court heard that Mr Edkins left the boiler working and filled in the commissioning paperwork and boiler guarantee, quoting a false Gas Safe registration number.
Soon after, the householders smelled gas in the room where the boiler was and called Mr Edkins back. He identified the location of the leak and fixed it.
-- Advertisement --
It was then the occupants decided to check Mr Edkins with Gas Safe Register and discovered he was not a registered engineer despite having carried out work for them in the past.
A local Gas Safe registered engineer visited, checked the installation and identified several serious defects.
Undersized copper pipe was used to supply gas to the boiler. This could have caused a potentially dangerous pressure drop if the boiler, fire and cooker hob were all in use at once. The fire and/or hob would have cut out, but as gas started flowing again as the other devices stopped, gas would escape into the room, potentially causing an explosion and putting the residents' lives at risk.
Mr Edkins also used copper pipe at the incorrect width and left corroded pipe work in a wall, which could also have led to leaks and explosions.
Once HSE was informed, Mr Edkins was served with a Prohibition Notice preventing him from carrying out further gas work until he was registered.
Glenn Phillip Edkins of Holly Road, Barton-under-Needwood, was sentenced to six months in prison, suspended for 12 months, and was ordered to pay a victim compensation order of £1,275. He was also ordered to pay costs of £1,264 having previously pleaded guilty to three breaches of the Gas Safety (Installation and Use) Regulations 1998.
(CD/JP)
